Quick review Routerboard RB962UiGS-5HacT2HnT(hAP-ac)

MikroTik released a product routerboard RB962UiGS-5HacT2HnT(hAP-ac). Until now in mikrotik has not issued an official info regarding this Routerboard. But when MUM in Indonesia in 2015 already presented yesterday. Well, we will try to do a little review about Routerboard RB962UiGS-5HacT2HnT.

From the name of RB962UiGS-5HacT2HnT we know that this router is a family of routerboard 900 series. With a 720 MHz processor, Numbers 6 testified ethernet amount of its existing 6 but on this router has 5 ethernet port SFP + 1, because there is also the letter G is then 5 ethernet gigabit ethernet. Figures 2 confirms that this router has two interfaces, with details wlan1 is 2.4Ghz Wireless (802.11b / g / n) and Wlan2 is Wireless 5GHz (802.11a / n / ac).

And a new one is the letter T (Triple Chain), Once we open the case of this router did in fact have embedded Antenna 3. Routerboard is also equipped with PoE-in in the ether 1 and PoE-out in the ether 5, there is also a USB port. From the design of its board reset button is no longer plug into the case but can be touch only.

This product has a difference with previous wireless products. RB962UiGS5HacT2HnT (HAPac) using dualfrequency (2.4 GHz and 5 GHz) and both were able to walk or be active simultaneously. We‘ve been doing wireless bandwidth test, test results obtained there are differences in bandwidth throughput that is passed when using wireless 802.11a / n / ac. By using standard 802.11 wireless throughput generated ac get the greatest results.




credit pict :mikrotik.co.id


No comments.

Leave a Reply