Alternative Arduno, UDOO have the capability and high performance

Alternative Arduno UDOO have the capability and high performance
UDOO is a single board computer that can be used both with Android and Linux, paired with Arduino compatible processors. It is a highly capable prototype boards for software development and design; easy to use and enables the development of the project with minimal knowledge of hardware design.

Alternative Arduno UDOO

Alternative Arduno UDOO

UDOO combine different computing world and can run together: each has advantages and disadvantages, but all of them are useful today for educational purposes as well as Do-It-Yourself (DIY) and rapid prototyping work. UDOO is an open hardware, low-cost platform is equipped with a Freescale ARM processor i.MX6 and compatible part Arduino Due SAM3X8E ATMEL ARM based processors, all of these are available on the same board!

UDOO Goals:

1. Developing innovative products for the growing market.
2. Provide a new vision for education framework, with the idea to train a new generation of engineers, designers and software developers skilled in digital technology: physical computing, multimedia art, interactive art,
3. Giving a boost to the world of DIY.
4. Offering embedded low cost platform for interactive art with high-performance tools.
5. Processing, OpenCV, PureData, openFramework Provides companies with a great tool for rapid prototyping.

UDOO Specifications:

Retail UDOO consists of three models, share most of the features and differ only for connectivity and processor i.MX6 used. All three models feature an embedded part Arduino compatible based Arduino Due appropriate scheme. UDOO dimensions are: 4:33 inch x 3:35 inch (11 cm x 8.5 cm).
udoo arduino compatible board

udoo arduino compatible board

  • Freescale i.MX6Quad, 24 x ARM® Cortex™-A9 core @ 1GHz with ARMv7A instruction set
  • GPU Vivante GC 2000 for 3D + Vivante GC 355 for 2D (vector graphics) + Vivante GC 320 for 2D
  • Atmel SAM3X8E ARM Cortex-M3 CPU (same as Arduino Due)
  • RAM DDR3 1GB
  • HDMI and LVDS + Touch
  • 2 Micro USB (1 OTG)
  • 76 fully available GPIO with Arduino compatible R3 1.0 pinout
  • 2 USB 2.0 type A and 1 USB 2.0 internal pin header (requires adapter cable)
  • CSI Camera Connection
  • Analog Audio and Mic jacks
  • on board Micro SD card reader (boot device)
  • Ethernet RJ45 (10/100/1000 MBit)
  • Power Supply (6-15V) and External Battery connector
  • Ethernet RJ45 (10/100/1000 MBit)
  • WiFi Module
  • SATA connector with power header

GPIO Features:

1. 76 GPIO fully available

2. V 3.3 Compliant.
3. R3 is compatible width Arduino 1.0 pinout
4.  All Arduino Compatible with most Arduino Due Shields and Shields
GPIO pins can be accessed as Arduino, GPIO or as an additional S PDIF, FlexCAN, I2S, SPI





No comments.

Leave a Reply